Text Customers When Their Technician Is on the Way
Text a customer that their technician is on the way, with an arrival time, when the stop before is checked out or the technician taps On My Way. When it sends, when it stays quiet, how to turn it on.
Updated November 17, 2026
On-My-Way Text tells a customer their technician is heading over. When a technician checks out of a stop in the mobile app, the customer at their next stop gets a text. For the work types you choose, the technician taps On My Way on the visit instead. Either way the text reads:
Your Company: Jordan is on the way to Community Pool and should arrive around 2:40 PM.
It lives under Settings
Open the automation
Go to Settings
Automations Customer Comms and find On-My-Way Text. Turning it on opens the On-My-Way Text window, which lists when the text sends and when it does not. Later, use Configure to open the same window. Choose the work types
Under By Work Type, every work type you have turned on is listed, and each one starts Off. Set the ones whose customers should be texted to Automatic, such as routine visits where someone opens the gate, or to Button, where the technician decides when to send it. The line under the heading counts how many work types are texted. Turn On stays greyed out until at least one work type is on Automatic or Button. A work type you add later also starts Off.
Send yourself a test
Click Send Test, enter your own mobile number, and click Send Test again. The sample is marked [TEST].
Turn it on
Click Turn On. This also ticks Text for Technician on the way under Settings
Customer Notifications, so you do not have to visit a second screen. Once it is on, change a work type and click Save; Turn Off stops every text and keeps your work type choices for next time.
Texting has to be set up
On-My-Way Text only goes by text. If customer notifications are switched off for your company, or you untick Text for Technician on the way later, the row shows that it is on but not sending.
Automatic or Button
| Choice | When the customer is texted | Good for |
|---|---|---|
| Automatic | The moment the technician checks out of the stop before. | Routes driven in order, where nobody has to remember to tap. |
| Button | When the technician taps On My Way on the visit. | The first stop of the day, routes not driven in order, and crews who want to choose the moment. |
| Off | Never. | Work where nobody is waiting, such as lakes or commercial sites with open access. |
Button appears in the list once at least one technician has the mobile app at version 1.4.27 or later. When some technicians have not updated yet, the window names them under the list: on their Button visits nobody is texted until they update, because older apps do not have the button (unless they tap On My Way in a browser).
When It Sends
For work types on Automatic:
- The moment a technician checks out of a stop on their phone.
- To the next open stop on that technician's route today, in route order, where they are the lead technician.
- With an arrival time worked out from the drive between the two stops, rounded up to the next 5 minutes. With no location to work from, the time is left out.
For work types on Button:
- When the technician taps On My Way and then Send. In the mobile app the button sits above Start Job on the visit, and on the visit's card in Jobs and in the Map stop list. In a browser it sits beside Start Job on the visit page and in the Jobs list, and beside Directions on the Start Visit step of a pond or lake visit.
- With an arrival time worked out from where the phone or computer is to the site. If it shares no location, the text is sent without a time.
- During SMS quiet hours too: the technician is asking for it now.
- Afterwards the visit shows Customer told you are on the way and the time, and its card shows Told and the time.
When It Stays Quiet
These apply to Automatic. For Button, see the next section.
| Situation | Why |
|---|---|
| The first stop of the day | Nothing is checked out before it. |
| The next stop's work type is Off | Only work types set to Automatic are texted. The stop after it is not texted instead. |
| The technician has more work for the same customer at the same address | The technician is staying put. |
| The next stop is more than an hour's drive away | That is a lunch or a long gap, not "on the way". |
| The next stop has a set time more than an hour off | A time the office or the customer fixed is kept. |
| SMS quiet hours | The text is dropped. It is never held and sent the next morning. Quiet hours are set under Settings |
| Someone other than the stop's lead technician completes the visit | The office, or a helper on the crew, is not the one driving to the next stop. |
| The visit is closed out afterwards | A checkout sent from away from the site, for a stop from another day, or within a few minutes of another checkout is catching up on paperwork, not leaving a stop. |
| The technician is already checked in at another stop | They are at that visit, not driving to the one after it. |
| A visit that was completed before is completed again | The first completion already had its chance. |
| The stop was already texted today | One text per stop per day. |
| The customer gets one message for a day of visits | On Whole day, they are told once for their first stop of the day. On Same address, once per address. |
| The stop is skipped for today, already started, or led by another technician | It is not the next stop. |
| Your company has no time zone set | Without it OpsVara cannot tell which stops are today's. Set it under Settings |
When the Button Does Not Send
The button only shows on a visit the technician is on the crew of, scheduled for today, not started yet and not skipped for today. When a tap does not send, the phone or the web page says why:
| Situation | What the technician reads |
|---|---|
| The stop was already texted today, by a tap or by the automatic text | The visit shows the time the customer was told, instead of the button. |
| The customer was told today about another visit at the same address, such as the pool before its spa | This customer was already told today that you are on the way. |
| The customer gets one message for a day of visits (Whole day) and was told today | This customer was already told today that you are on the way. |
| The office changed the work type away from Button | This work type does not use the On My Way button. |
| On-My-Way Text was turned off | On-My-Way Text is turned off. The office turns it on in Automations. |
| Text is unticked for Technician on the way | Texts for Technician on the way are turned off in Customer Notifications. |
| Your company has no time zone set | Your company has no time zone set, so today cannot be worked out. Ask the office to set one. |
Each work type's choice is also shown, read-only, in two other places, each with a link back here:
- Under Settings
Customer Notifications, the Technician on the way row names the work types that are texted, with Choose work types in Automations. On the Per Work Type tab, the Technician on the way column shows Automatic, Button or Off for each work type. - Under Settings
Work Types, each work type's card has an On-the-way text section with Change in Automations.
If the automation is on but every work type is Off, its row reads On ยท not sending.
A technician on Automatic who does stops out of order is texted for the next stop after the one they just finished. A stop they jumped over was texted when they finished the stop before it, so it does not get a second text when they go back.
Who Gets It
The same people as the pre-visit reminder text. When a site has visit notification contacts with Send by text ticked, those phones get it instead of the customer. If the site also has Also send to the customer's primary contact ticked, the customer's primary mobile number gets it as well. Set these on the site under Directories
Verify It Worked
Under Settings
Frequently asked questions
Does the technician have to tap anything?
Not for work types set to Automatic. That text is sent when they check out of the stop before, which they already do to complete a visit in the mobile app. For work types set to Button, the technician taps On My Way on the visit instead, and nothing is sent until they do.
Why did the first customer of the day not get a text?
The automatic text is triggered by checking out of the previous stop, and nothing is checked out before the first stop. Set that work type to Button and the technician can tap On My Way before driving to the first stop.
Why can I not choose Button?
Button appears under By Work Type once at least one technician has the mobile app at version 1.4.27 or later, which is the first version with the On My Way button. Older apps do not show it, so a work type set to Button would never be texted. Ask your technicians to update the app from the App Store or Google Play.
A technician does not see the On My Way button. Why?
It shows only on a visit whose work type is set to Button, that is scheduled for today, has not been started, is not skipped for today, and that the technician is on the crew of. On-My-Way Text has to be on, and Text has to be ticked for Technician on the way under Customer Notifications. A technician on an app older than 1.4.27 does not have the button on their phone; the On-My-Way Text window lists who has not updated. In a browser, the button is on the visit page and in the Jobs list.
How is the arrival time worked out?
From the straight-line drive between where the phone was at checkout and the next site, rounded up to the next 5 minutes. It is an estimate, which is why the text says "around". If the phone had no location or the site has no map pin, the text is sent without a time.
Who receives the text?
The same people as the pre-visit reminder text. That is the site's visit notification contacts when the site uses them for texts (and the customer's primary contact too, if the site has Also send to the customer's primary contact ticked), otherwise the customer's primary contact's mobile number. Anyone who has replied STOP is skipped.
Which work types get the text?
Only the ones you set to Automatic. In the On-My-Way Text window, under By Work Type, every work type starts Off. A customer whose next stop is a work type left Off is never texted, and the stop after it is not texted instead.
We turned it on before work types could be chosen. Did it stop?
No. A company that had On-My-Way Text on before then keeps texting every work type, and its list opens with every work type on Automatic. Set a work type to Off to stop texting it.
A customer did not get a text. Why?
The usual reasons are on this page under When It Stays Quiet. The most common are the first stop of the day, a stop more than an hour away, SMS quiet hours, a visit closed out afterwards instead of at the site, a Button work type where nobody tapped On My Way, and a customer with no mobile number.
Can I change the wording?
Not yourself. The wording is the same for every company by default. OpsVara support can change it for your company.
Related guides
- Get Alerted About Low Customer RatingsTell the right people when a customer rates a visit low โ by role or by name, in the app and by email โ with rules for star levels, comments, and work types.
- Why Something Did Not HappenNo contract after approve, missing chemical lines, portal invite with no email, blocked scheduled job, or draft invoices that never sent.